Furniture panel (specification) is a polished wooden panel, the dimensions of which can be as follows:
| Sizes, mm |
min |
max |
| Length |
600 |
3000 |
| Width |
100 |
1100 |
| Thickness |
10 |
100 |
 As for the resistance characteristics, furniture panel doesn’t yield whole section (one-part) timber because lamellas are connected (glued) one with other with the help of cut beforehand surfaces with coaks. Advantages of glued wooden goods as for whole section goods are as follows:
-
The cost of glued wood is less because of the achievement of feedstock deeper processing. Besides, furniture enterprises can buy ready-made half-finished furniture product what makes the process of millwork and furniture production cheaper.
-
Goods made of glued wood are never warped because the curve of each detail will inevitably be compensated by other.
-
Goods of big dimensions can be made only of furniture panel.
Furniture panel is made by gluing the wooden lamellas in a press with further polishing of surfaces. Furniture panel can be of “elite” type – when whole lamellas are used for production of panels (picture 1). A variant of joined panel also exists- when lamellas are glued of separate parts (picture 2).
 One-piece panel is more expensive because it has more attractive appearance although it has lower exploitational characteristics compared with joined panel.
Other glued goods
-
Stairs.
-
Furniture panel (joined).
-
Tabletop with rounded side of whole lamella.
-
Joined timber.
-
Deal board.
|
